X-VISION HD VIDEO SYSTEM
![](/img/m/105.jpg)
The "X-VISION" CCTV has been designed in order to be able to record underwater images with one, two three or four divers in the water. Its robust and modern design makes it stand out from other CCTVs.
The "X-VISION" CCTV has been designed in order to be able to record underwater images with one, two three or four divers in the water. Its robust and modern design makes it stand out from other CCTVs.
The SBQ CONTROL II panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.
The Mini-Com control unit is a device designed as an underwater communication system between the surface caller and one or two divers.
With the Lars system, Lite Compact Basket for 2 plongeurs, a special option to offer an option that is extremely compact with the standard release and recovery systems proposed by us. The size is adjusted according to the possibility of managing the moins of the place possible and the transport is also economical as possible.
The SBQ CONTROL III panel is a portable power system with control and monitoring for diving operations with surface air supply for three divers. The system was designed to supply air from the surface and control the depth of the divers.
The Subcom Control Unit is a device designed as an underwater communication system between the surface caller and one or two divers. Thanks to the 4-wire communication, divers can communicate with each other.
With the Lars system, Lite Compact Basket for 2 plongeurs, a special option to offer an option that is extremely compact with the standard release and recovery systems proposed by us. The size is adjusted according to the possibility of managing the moins of the place possible and the transport is also economical as possible.
The Shark Light projector has been designed to illuminate work areas, even in the most hostile environments. Its small size and weight make it a very useful and easy to manage tool. The housing is made of stainless steel, which makes it almost indestructible to wear, with an output of 1500 to 1700 lumens and a light angle of 140 º. A 2-pin Seacon BH-2-MP connector is incorporated for reliable and secure coupling.
The SBQ CONTROL I panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.
This small and rugged handheld diver acoustic receiver with LCD display and signal strength meter can track and locate any acoustic pinger that operates between 5 to 80 kHz.
The Norgren filter set is designed to clean any impurities that may be in the air the compressor sucks in and supplies air to the divers.
The ATT-400 transponder can operate underwater as a pinger or transponder. This underwater acoustic transponder is small and easy to deploy in depths of 1000m. When interrogated by the STI-350, DTI-300 or VADR series acoustic receivers, the ATT-400 provides range and bearing up to 750 meters away. The ATT-400 can also be programmed to operate as a free-running pinger. With a battery life of up to six months, this transponder is ideal for marking equipment and locations in poor visibility.
This underwater beacon is a cost effective free-running pinger used for marking equipment and underwater sites to depths of 1,200m. Using a single 9-volt battery, the ULB-350 can send a continuous acoustic signal for up to 60 days or on a programmed time delay for up to three months.
Synergy HSE two-diver inshore panels are built specifically for non-imca shore diving operations. Each diver has 1 independent HP supply line and 1 independent LP supply line per diver. Inlet and outlet fittings can be provided from the side, top or bottom of the panel. We can supply as a portable panel or mounted on a frame for permanent installation.
The Dusky Shark T2 Subsea Line Laser is used when measurements are needed from video images.
The PRS-275 is a diver pinger receiver that can be converted to surface pinger receiver using a separate directional hydrophone and user adjustable staff assembly. The system includes the DPR-275 diver pinger receiver, waterproof headset, adjustable staff assembly with directional hydrophone, cable assembly, and shipping container.
The FULL DIVING CONTROL SBQ panel is a portable control and monitoring supply system for surface supplied air diving operations for three divers. The system has been designed to supply air from the surface, control the depth of the divers, have communication and visualize the operations of the divers from the surface.
Synergy designed diving SRP's are one of our popular products and have been very well received in the diving industry. Manufactured with a stainless steel frame, 4 x 50 ltr x 200 bar lightweight carbon composite cylinders, all connected to an air management panel and the two diver panels for diver air supply and cylinder charging.
The FULL DIVING CONTROL SBQ panel is a portable control and monitoring supply system for surface supplied air diving operations for three divers. The system has been designed to supply air from the surface, control the depth of the divers, have communication and visualize the operations of the divers from the surface.
The FULL DIVING CONTROL SBQ panel is a portable control and monitoring supply system for surface supplied air diving operations for three divers. The system has been designed to supply air from the surface, control the depth of the divers, have communication and visualize the operations of the divers from the surface.